DESCRIPTION
Application:
NISANN SKYLINE R33 R34 GTR RB26DETT
Details:
AVAILABLE FOR BOTH R33 GTR & R34 GTR.
Intercooler with the inlet /outlet 80mm OD size
Pipe od size : 80mm
COMES WITH 4PIECES PIPEWORK (ALL 80mm),
8 PIECES SILICON HOSE,
16 PIECES CLAMPS ,
AS SHOWN IN PICTURE
Instruction is not included.
Professional installation is highly recommended
The quality and fitment of this kit is similar to much more expensive fmic's on the market like Greddy, Blitz, HKS and even APS.
In most cases this front mount intercooler is larger and more efficient than the rest.
For those who want a comparison for fitting, the kit is identical to the Greddy kit.
Key features and benefits:
- Tabs on bottom and top for easy installation
- Improved Tube and Fin to increase performance efficiency by 15% over the old bar and plate design
- Ultra low intercooler pressure drop: 0.5-1psi at 23psi (normal bar and plate intercooler is 2.8- 4 psi at 23 psi)
- 35% weight reduction compared to bar and plate type intercooler
- Everything in the photo is included
It's the upgrade model, so it need repair to suit ,please pay more attention to it.
Note:
The pipe is the aluminum material, it is the casting process, so it can't make as flat as the polished parts.
It comes same as on the picture,you can see the inside of the pipes , If you care about it, please don't buy ,or you will not like it.
The kit only include as the picture,
This is an upgrade kit may require additional parts.
Additional piping may be required depending on your desired set up.
Send your message to us
Copyright © Hefei Inat auto parts co., ltd All rights reserved. Powered By 0579net.cn