Comes with 3/4X16UNF and M20XP1.5 Adapter for Most Vehicle Application
Universal oil cooler kit for high performance and heavy duty Japan tuning vehicles.
100% brand new, Never been tried or installed
Made with super light weight high quality 6061 Aluminum
The oil filter sandwich plate features a built in Thermostat, this keeps the oil cooler from circulating oil until the car is warm then the valve will open and allow oil to flow through the cooler. Equip with additional 1/8 NPT side ports allow for easy oil temperature, and pressure sensor insert.
keep the engine oil temperature at about 73 degrees C +/- 0.5 degree, this is the minimium temperature required to evaporate oil contaminants..
2 oil lines ( 1.4m and 1.6m )
1pcs aluminum sandwich plate in either standard or thermostatic form.
No instructions included, Professional installation is highly recommended
Same as on the picture
Inlet & Outlet Fitting: AN10
Inlet Outlet Center Distance of oil cooler: 262mm
Oil filter fitting Thread = 3/4X16 UNF and M20XP1.5
Send your message to us