DESCRIPTION
- CNC Machined Billet Base - Ensures 100% Seal against the gasket and is FLAT
- Equal Length Profiled runners - ensures 100% fitment with minimal lip/step
- Designed for equal flow between all runners so that there's minimal chance of leaning out Cylinders 5 & 6
- FLOWBENCH and Pressure tested to withstand 50+ PSI
- PURGE AC TIG Welded - Reduces the slag inside the manifold to stop any metal from getting into your engine
- 14mm Fuel Rail Conversion - Use ID 48mm or 60mm length 14mm Top Side Injectors
- Uses FACTORY IACV under plenum for ease of idle control!
- Will support in excess of 1000HP at the wheels with supporting mod and 50+ Psi peak.
- Comes with fuel rails and 90mm TB
Included:
- 1x BILLET 1JZ-GTE Manifold
- 1x 90mm Billet Throttle Body SET to suit TOYOTA TPS (2JZ/1JZ TPS)
- 1000HP+ 14mm Injector 3-Port Fuel Rail to suit -6 to -10 fittings
- All mounting hardware
- O-Rings for IACV and Throttle body
- 3/8 and 1/8 NPT fittings
- Throttle cable brackets
- Mounting Hardware
Send your message to us
Copyright © Hefei Inat auto parts co., ltd All rights reserved. Powered By 0579net.cn